Tribological properties of carbon coatings deposited by electron beam
DOI:
https://doi.org/10.37135/ns.01.05.09Keywords:
Carbon, electron beam, hardness, thin films, roughness, steels, tribology, wearAbstract
In this work, carbon (C) films were produced on D01 and D03 steel substrates. They were deposited using the electron beam technique using argon (Ar) as the precursor gas. The hardness, roughness, and wear of the films were studied using a Berkovich tip to evaluate the hardness and a pin's tribological machine on disc configuration to measure the wear. The films' hardness varied concerning the substrate used, which caused a change in the coefficient of friction and wear. A considerable increase in the hardness allowed the decrease of the friction coefficient.
Downloads
References
Beltrán, F., & González, J. (2002). Nuevos materiales superduros. Avance y Perspectiva, 21(7), 347-354.
Burdovitsyn, V., Medovnik, A., & Oks, E. (2011). Synthesis of Carbon Nanostructures by Electron Beam Graphite Evaporation. Nanotechnol Russia, 6(3-4), 265–267. https://doi.org/10.1134/S1995078011020042
Capote, G., Mastrapa, G., & Olaya, J. (2014). Resistencia al desgaste y a la corrosión de recubrimientos de DLC depositados sobre aceros AISI 304 Y AISI 1020. Rev. LatinAm. Metal. Mat. 35(1). 134-141.
Gómez, M. A. (2005). Caracterización de las propiedades tribológicas de los recubrimientos duros. (Tesis Doctoral). Universidad de Barcelona, Barcelona, España. https://dialnet.unirioja.es/servlet/tesis?codigo=4028
Gonzalez, H. J., (2009). Estudio para mejorar la resistencia al desgaste de una esfera de acero acoplada a una válvula de paso para el transporte de cenizas. (Tesis de Maestría). Instituto Politécnico Nacional. DF: México. Recuperado de https://tesis.ipn.mx/handle/123456789/8197
Grill, A. (1999). Diamond-like carbon: state of the art. Diamond and Related Materials, 8(2-5), 428-434. https://doi.org/10.1016/S0925-9635(98)00262-3
Holmberg, K., Matthews, A., & Ronkainen, H. (1988). Coatings tribology–contact mechanisms and surface design. Tribology International, 31(1–3), 107–120. https://doi.org/10.1016/S0301-679X(98)00013-9
Holmberg, K., Ronkainen, H., & Matthews, A. (2000). Tribology of thin coatings Review. Ceramics International, 26(7), 787-795. https://doi.org/10.1016/S0272-8842(00)00015-8
Liu, Y., Erdemir, A., & Meletis, E.I. (1996). A study of the wear mechanism of diamond-like carbon films. Surf. Coat. Technol, 82(1-2). 48-56. https://doi.org/10.1016/0257-8972(95)02623-1
Medovnik, A., Burdovitsyn, V., & Burachevsky, Y. (2008). Carbon films, prepared by electron beam evaporation of graphite target. In Proc. of 9th Int. Conf. on Modification of Materials with Particle Beams and Plasma Flows. Russia.
Meza, J., Chaves, C., & Vélez, J. (2006). Técnicas de indentación: medición de propiedades mecánicas en cerámicas. DYNA, 73(149), 81-93. https://dialnet.unirioja.es/servlet/articulo?codigo=4599120
Moriguchi, H., Ohara, H., & Tsujioka, M. (2016). History and Applications of Diamond-Like Carbon Manufacturing Processes. Sei Technical Review, 82, 52-58.
Murakawa, M. (1997). Surface coating of superhard materials for tool applications. Materials Science Forum, 246, 1-28. https://doi.org/10.4028/www.scientific.net/msf.246.1
Nieto, E., Fernández, F., Duran, P. & Moure, C. (1994). Películas delgadas: fabricación y aplicaciones. Bol. Soc. Esp. Cerám. Vidrio. 33(5). 245-258.
Segura, B. (2003). Producción y caracterización de recubrimientos en multicapas de TiN/DLC en películas delgadas. (Tesis de Maestría). Universidad Nacional de Colombia Sede Manizales, Manizales, Colombia. Recuperado de https://repositorio.unal.edu.co/bitstream/handle/unal/2824/belarminoseguragiraldo.2003.pdf?sequence=1
Roberge, P. (2008). Corrosion Kinetics and Applications of Electrochemistry to Corrosion. Corrosion Engineering Principles and Practice. New York: McGraw-Hill. pp. 85-144.
Tascón, J. (2007). Materiales de carbono: estructuras y formas. Opt. Pura Apl., 40(2), 149-159.
Vázquez, A., & Damborenea, J. (2001). Ciencia e ingeniería de los materiales. Madrid, España: Consejo Superior de Investigaciones Científicas.
Vepřek, S. (1999). The search for novel, superhard materials. J. Vac. Sci. Technol. A, 17(5). 2401-2420. doi: 10.1116/1.581977
